2-Axis Hydraulic Cylinder Tube Systems
The B&O CNC Cylinder Tube System converts full-length 1026-DOM steel tubing into finished hydraulic cylinder tubes in one fully-automatic operation. The cylinder tube systems will handle diameters from 1.125" to 12.00" with the typical incoming tubes being 24' to 32' in length. Seamless steel tubing can also be processed into cylinder tubes on these systems. B&O customers process welded, tie-rod, and telescoping cylinder tubes. Finished tube machining configurations include ID threads on one end, OD threads on one or both ends, chamfer weld preps, j-groove weld preps, ID and OD snap ring grooves, lock-wire grooves, port holes of any configuration, bleeder holes and manifold porting. Port, bleeder, and manifold ports typically range in size from 0.060" to 1.50". These holes can be located anywhere along the length of the cylinder tube and in any radial location. Port holes can be radially located with an accuracy of (+/-) 0.05-degrees. B&O automatic part unloader will handle finished tube lengths from 6.00" to 32'. B&O is the industry leader in producing CNC Turning Systems for manufacturing hydraulic cylinder tubes with installations throughout North America and in Europe.
For more information, call 440.498.5800 or .