Fanuc Robotics Authorized Integrator
5800 Harper Road
Solon, OH 44139
(440) 498-5800 (p)
(440) 498-2001 (f)

Hours: Mon-Fri
7:30 am - 4:30 pm EST


The RH-700HP Rotating Head (Rotary Head) Cutoff Machine

More Cutting Capacity
The key to success in high volume cutting is square inches per minute, hour after hour, day in and day out- and that is
where the RH-700HP excels.

Precision Cut Blanks – Lathe Tolerances From a Rotary Head Cutoff
The RH-700HP is capable of producing finished workpieces in a strict Cpk environment requiring a length tolerance down to +/-0.005”. The raw material loss of a sawed blank when compared to a precision blank from our rotary head machine, the RH-700HP can amount to thousands of dollars per year. Length tolerance control and parallelism means less material lost during downstream finishing operations.

  • Achieve 45-50 or more on high production heavy-wall tube processing
  • Uses up to four cutting tools simultaneously
  • Controls process times by providing constant feed rate with load monitoring
  • Minimizes non-cut time by tailoring material handling equipment to the process
  • Optional Mist Coolant System significantly increases tool life, improves surface finish on finished workpiece faces, and increases potential cutting tool feed rates
View Machine Specifications

Read the literature or download a copy of the literature on this product.

Rotating Head Cutoff Machine Photo
Rotating Head Cutoff Machine Gallery

Key Features of the RH-700

       Rotating Head

  • Four precision-built hardened tool steel cutoff slides and gibs with 8620 alloy steel bases mounted on the rotating head
  • Long travel accommodates a wide range of material sizes without resetting tools
  • Tools may be added to cut O.D. chamfers
  • Front spindle bearing – triplex angular contact ball bearing; Rear spindle bearing – single radial ball bearing
  • Dedicated mist lubrication for spindle bearings with confirmation sensor

       Quick Set-Up Tube Loader

  • Tube Loader Kick Outs: The loading table kick out arms load one tube at a time. Adjustable tube stops allow full range of tube O.D.’s to be loaded and all stops can be adjusted and locked into position in seconds from one location onto feed rolls
  • Tube Loader Feed Rolls: Maintain incoming material on spindle centerline, and the electrically actuated adjustable height allows tube O.D. size changeovers in seconds.

       Mist Coolant System (optional)

  • Extends tool life
  • Allows increased cutting rate
  • Improves surface finish
  • Requires less maintenance than flood coolant system

       Central Lubrication System

  • Delivers positive lubrication to critical machine elements

For information about Bardons & Oliver Rotating Head Machines capable of cutoff and finishing, see our RH Series line.

Contact Info
For more information, call 440.498.5800 or .